REPSOL SUPER TAURO PAG 1000

Description
High performance synthetic lubricants with polyglycol base stocks. Formulated with the lasted generation additives, allowing service at severe conditions and at wide range of temperatures.
Developed with water soluble stocks which insure excellent EP and micropitting characteristics.
With a very good oxidation resistance allowing a long drains intervals.
Uses recommended
Specially formulated for bearings and helical, bevel-helical, planetary and worm gear units.
Can not be mixed with mineral oils, it is necessary to clean the installation when change from mineral oil to Super Tauro PAG.
Characteristics
Exceptional oxidation resistance at high temperatures.
Low pour point, allowing work at low temperatures.
High viscosity index.
Compatible with a great number of coatings and seals.
Free of chlorine and sulphur or lead based compounds.
Minimal formation of deposits.
Optimal EP and micropitting properties.
Exceptional friction rate, which makes it especially recommendable for worm gear units.
Quality level
DIN 51517 /3 – CLP (not emulsion) David Brown Type G
ISO 6743 /6 - CKC Flender
Technical data -

Available in
Drums of 205 kg.
Hazard Identification
Not classified as toxic or dangerous according to current legislation.
Handling
Avoid contact with the product wearing suitable protective clothing, PVC gloves and safety goggles or visors to avoid splashes. Do not smoke, drink, or eat during handling.
Health and safety hazards
Inhalation: Move the victim to fresh air. Administer oxygen if necessary. Call for medical attention.
Ingestion: Do not induce vomiting. Flush the mouth with water. Do not give anything by mouth to an unconscious or convulsing person. Call for urgent medical attention.
Contact with Skin / Eyes: Flush with plenty of water and soap. In case of contact with eyes, flush with plenty of water during at least 15 minutes. Call for medical attention.
General measures: Call for medical attention.
Fire fighting measures
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Water applied directly may be ineffective due to product dispersion.
Environmental precautions
Danger of physical contamination in case of spillage (water flows, coastal areas, the ground,etc.). Its components may have negative long term effects in watery areas. Avoid the entrance of material in water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means.